Manual roll slitting machine for rolls up to 60 kg with max diameter 30cm, max displacement of the blade carriage from the chuck of 183 cm.
The unit can slit most of the materials in rolls, fabric, non-woven with and without adhesives.
With special devices, machine can slit  foam rolls in polyethylene and PVC,
glass and carbon fibers, plastic films, rubber, masking tapes, roofing materials and more.
Machine available for length up to 300cm and larger blades.

Download data sheet


  • Highly safe for the operator. The blade is totally protected by a guard and the operator can perform the cut only if both hands are on a pushbutton and on the cutting lever.
  • Blade diameter 40 cm with fixed speed (adjustable speed on request). Blade diameter 45 cm or diameter 50 cm available on requests. Accuracy of positioning ±0.3 mm
  • Manual cut with positioning of the blade carriage with a pneumatic cylinder. The operator pushes a button and the blade carriage indexes to the preset cutting width.
  • The maximum cutting width 20 cm, wider cuts can be done by setting half width and doing two displacements of the blade carriage.
  • Fixed roll rotation speed. Adjustable speed on requests.
  • Sharpening of the circular knife (both sides) with motor for the main grindstone and auxiliary grindstone for removing the sharpening burrs.
  • Machine includes a diamond to dress the main grindstone.
  • Self centering mechanic chuck with grippers to lock the roll on the cardboard and on the external diameter of the roll.


  • T100/SIL
    Blade lubrication system
  • T300/INVL
    Blade speed control with inverter
  • T300/VARP
    Roll speed control with planetary variable speed drive
  • T100/REV
    Winding device to rewind rolls on the paper tube in the roll shaft support
  • T100/3MT
    Extra for machine with roll shaft length up to 300 cm
  • T100/D50
    Extra price for blade diam. 50 cm max roll diam. 35 cm
  • T100/FLA
    Flange with springs for roll support
  • T100/BAR
    Extra roll shaft support with diameter at choice (between 34 and 75 mm)
  • T500/COL

    Blade cooling system by compressed air expansion