Numerically controlled automatic roll slitter for rolls max diam.30cm (12").
Max displacement of the blade carriage from the chuck of 185cm (73") and possibility to load rolls with max length 215cm (84").
Movement of the blade towards the roll with wormscrew and brushless motor.
The unit can slit most of the materials in rolls, fabric, non-woven with and without adhesives.
With special devices, machine can slit foam rolls in polyethylene and PVC,
glass and carbon fibers, plastic films, rubber, masking tapes, roofing materials and more.
- Automatic cut with high speed positioning of the blade carriage with wormscrew and BRUSHLESS motors with possibility of presetting up to 3 cutting widths (up to 999.99 mm each) and the number of cuts for each cycle.
- Machine can also easily be operated manually.
- Adjustable blade rotation speed (up to 600 RPM) and adjustable roll rotation speed (up to 400 RPM) with digital vectorial inverter.
- Possibility to select the roll rotation direction.
- Automatic sharpening of the circular knife (both sides) with adjustable sharpening time after a programmable number of cuts.
- Totally closed machine. Highly safe for the operator.
- Self centering pneumatic chuck with grippers to lock the roll on the cardboard and on the surface.
- Machine standard equipped with non rotating roll shaft. Rotating shaft on request with extra cost
- Pneumatic system to lift and support the roll shaft
- Blade penetration speed in the roll and force adjustable on continuous rate with wormscrew movement and brushless motor
- Photocell to stop the blade carriage movement when the blade is out of the roll (automatic roll diameter adjustment).
- PLC controlled machine with HMI Interface. Touch screen panel for message display, data entry and indications of any cutting parameter
- Cutting speed up to 9 cuts/min.
- Max roll dimensions: diam. 300 mm, length 2150 mm, weight Kg.60. Avalable on request for larger rolls
Automatic blade lubrication system with presettable lube on/lube off time.
Blade motor with power 2,2 Kw
Automatic blade cleaning system on both sides
Machine with blade diam. 50 cm for rolls max diam. 40 cm
Machine modified for blade cooling system with water
Double lubrication system with two tanks and selection of the liquid
Machine for max roll length 160 cm
Device for remote connection of the machine through internet to our technical offices
Wormscrew reducer for the blade
Blade cooling system by compressed air expansion