The machine P90 is a simple but flexible single-mold unit than can mold different types of materials (cotton, elastomeric fabrics, micro fibers, foam, multi-layer fabrics) including pre-cut pieces (i.e. cups with the shape to be sewn on the bra, no need of die cutting after molding) and in some cases even the finished garment (post-molding).

The machine consists of a molding area where the pieces are loaded/unloaded on a cold disk that can be changed depending on the size.
The operator positions the pieces on the loading/unloading station then starts the molding cycle and waits until they are molded.
The molding cycle consists of the descent from the top of a heated bell to keep uniform the temperature around the fabric and then a heated mold moves upwards for molding the cup.
This exclusive system reduces the molding time even to 25 sec or less.
Once the cycle is finished, the operator removes the molded cups and positions the new material.
A simple adjustment enables the position of the mold in the heated bell to get the requested height of the cup.
All setting of temperature and times are adjustable with digital timers and thermoregulators.
Machine equipped with SIEMENS PLC.
The operation of changing a mold and the disk is easy and fast, no need to do any electrical connection.
Presettable timer for automatic startup and shut down of the unit (on request).