The machine P95 is a simple but flexible single-mold unit with moving table than can mold different types of materials (cotton, elastomeric fabrics, micro fibers, foam, multi-layer fabrics) including pre-cut pieces (i.e. cups with the shape to be sewn on the bra, no need of die cutting after molding) and in some cases even the finished garment (post-molding). The machine is specially designed for molding ONLY the extra large sizes (molds from diameter 95 mm / 3" ¾ or larger).

The machine consists of a positioning table that moves from the loading/unloading area to the molding area inside the machine.
The operator positions the pieces on the loading/unloading area then the table moves to the molding station inside the machine.
The molding cycle consists of the descent from the top of a heated bell to keep uniform the temperature around the fabric and then a heated mold moves upwards for molding the cup.
This exclusive system reduces the molding time even to 25 sec or less.
Once the cycle is finished, the table returns to the loading/unloading area then the operator removes the molded cups and positions the new material.
A simple adjustment enables the position of the mold in the heated bell to get the requested height of the cup.
All setting of temperature and times are adjustable with digital timers and thermoregulators.
Machine equipped with SIEMENS PLC and operator terminal to set machine datas and display alarm messages.
The operation of changing a mold and/or a disk is easy and fast, no need to do any electrical connection.
Presettable timer for automatic startup and shut down of the unit standard on the machine.