Products Molding bra cups Molding bra cups Molding machines for fabric cups Molding machines for fabric cups



The machine P94 is a flexible unit with two molds than can mold different types of materials (cotton, elastomeric fabrics, micro fibers, multi-layer fabrics) including pre-cut pieces and in some cases even the finished garment (post-molding). The distance between molds is adjustable

Download data sheet


  • Possibility to adjust the distance between the molds and the heated bell for molding the open garment with both cups on the same operation (one mold thermoform one cup).
  • The machine consists of two molding areas where the pieces are loaded/unloaded on a cold disk that can be changed depending on the size.
  • The operator positions the pieces on the loading/unloading stations and waits the until they are molded.
  • The molding cycle consists of the descent from the top of a heated bell to keep uniform the temperature around the fabric and then a heated mold moves upwards for molding the cup.
  • This exclusive system reduces the molding time even to 20 - 25 sec or less.
  • Once the cycle is finished, the operator removes the molded cups and positions the new material.
  • A simple adjustment enables the position of the mold in the heated bell to get the requested height of the cup.
  • All setting of temperature and times are adjustable with digital timers and thermoregulators.
  • Machine equipped with PLC.
  • The operation of changing the molds and the disks is easy and fast, no need to do any electrical connection.
  • Presettable timer for automatic startup and shut down of the unit on request.