TPM/1000

The collarette machine class TPM/1000 is a fully automated system for cutting with high accuracy and productivity collarette tapes from any flat folded tubular knitted fabrics (or in rolls with a device on request).

The fabric is placed on a rotating disk then fed from bottom to top through two feeding rollers which feed tension free the material towards the cutting section of the unit.

Download data sheet

Features

Dimensions of tubular diameters: from cm 40 to 100 cm ( 16" to 40")
Adjustable cutting speed up to 60 mt/min with digital vectorial inverter standard included in the machine
Pneumatically controlled crush cut knives in HSS steel cutting on a hardened steel roller located on the left feeding roller.
The machine can cut with a high for each kind of material, including knitted fleece, single jersey, elastomeric fabrics with lycra content.
Cutting pressure of the knives pneumatically adjustable.
Adjustable cutting and rewinding tension to obtain tension free collarette rolls. .
Easy and simple adjustment of the machine with the automatic speed variation of the rotating disk depending on the tubular diameter and possibility of a further manual adjustment.
Servomotor to open or close the vertical fabric feeding rollers symmetrically to the rotating disk to eliminate the feeding tensions.
Automatic machine stop at the preset roll diameter ( or with a meter counter on request)
Width of the main cutting strip: from 15 to 180 mm (depending on the material)
Number of cutting knives: Standard 3 blades (up to 7 blades with extra price)