Numerically controlled automatic roll slitter for rolls with max diameter 30cm (12") and length 73". Machine available also for larger rolls.
The unit can slit most of the materials in rolls, fabric, non-woven with and without adhesives.
With special devices, machine can slit  foam rolls in polyethylene and PVC,
glass and carbon fibers, plastic films, rubber, masking tapes, roofing materials and more.

Download data sheet


  • Automatic cut with high speed positioning of the blade carriage with wormscrew and BRUSHLESS motors with possibility of presetting up to 6 cutting widths (up to 999.99 mm each) and the number of cuts for each cycle.
  • Machine can also easily be operated manually.
  • Adjustable blade rotation speed (up to 600 RPM) and adjustable roll rotation speed (up to 400 RPM) with digital vectorial inverter.
  • Possibility to select the roll rotation direction.
  • Automatic sharpening of the circular knife (both sides) with adjustable sharpening time after a programmable number of cuts.
  • Totally closed machine. Highly safe for the operator.
  • Self centering pneumatic chuck with grippers to lock the roll on the cardboard and on the surface.
  • Machine standard equipped with non rotating roll shaft. Rotating shaft on request with extra cost
  • Pneumatic system to lift and support the roll shaft
  • Blade penetration speed in the roll and force adjustable on continuous rate and photocell to stop the blade carriage movement when the blade is out of the roll (automatic roll diameter adjustment).
  • PLC equipped machine with TOUCH SCREEN operator panel for message display and data entry.
  • Cutting speed up to 8 cuts/min.
  • Max roll dimensions: diam. 300 mm, length 2150 mm, weight Kg.60. For bigger rolls on requests


  • T300/SIL
    Automatic blade lubrication system for the blade with presettable lube on/off time
  • T500/BMT
    Blade motor with power 2,2 Kw
  • T500/CLE
    Automatic blade cleaning system on one side
  • T500/CLN
    Automatic blade cleaning system on both sides
  • T500/D50
    Machine with blade diam. 50 cm for rolls max diam. 40 cm
  • T500/WAT
    Machine modified for blade cooling system with water
  • T500/WLUB
    Double lubrication system with two tanks and selection of the liquid
  • T500/L160
    Machine for max roll length 160 cm
  • T500/COL

    Blade cooling system by compressed air expansion