T/4000

High productivity automatic roll slitter for max roll diameter 300 mm with a rotating turret for the simultaneous cut of two rolls.

Particularly suitable for rolls of foam, laminated foam and spunbond.

Maximum roll dimensions:

Two rolls diam. 300 mm (12”) x 1.950 mm (77”), Kg 60 (140 lbs) each

or

One roll diam. 400 mm (16") x 1.950 mm (77”), Kg 60 (140 lbs)

Machine totally closed and highly safe for the operator.

This machine has been designed with the utmost attention to safety features to obtain, for the first time in the market,

from IMQ (www.imq.it Italian Institute for Quality Trademarks) the Certification of Examination “CE” for standards 2006/42/EC

All the machine motors are brushless.

Numerically controlled positioning of the blade carriage positioning and automatic cut with the possibility of programming up to 6 cutting measures for each automatic cycle and numerically controlled blade penetration movement into the roll.

Laser system to measure the blade diameter with automatic adjustment of stop position near the roll support shaft.

No knob to adjust the forward travel end of the blade carriage.

Four self-centering pneumatic chucks with double locking on the carton and on the external surface of the roll.

The rotation of the turret is possible only when the operator is at a safety distance from the machine.

A laser scanner system checks the presence of people at a safety distance from the unit and stops immediately the rotation in case of danger.

Automatic lock system of the roll shaft extremity by a sliding arm with pneumatic clamping system

Automatic sharpening of the circular knife on both sides by BORAZON grindstones.

Blade speed will be set automatically to the optimal sharpening speed during operation.

Automatic blade lubrication and cooling system

Up to 50 different cutting cycles.

All cutting parameters can be stored and retrieved into the machine memory from each program.

Machine prepared for connection Industry 4.0 with Modbus/TCP protocol

PLC controlled machine with a separate safety PLC to control the safety devices and equipped with complete diagnostic software